基于热阻网络的大功率LED热管散热研究

LED结温高一直是大功率LED发展的技术瓶颈,随着单位热流密度的不断攀升,在自然冷却条件下,单纯的直肋热沉散热方式已不能满足散热要求。应用热管技术设计了热管散热系统,对该系统的传热机理和传热路线进行分析,建立该系统对应的热网络模型,对各部分热阻进行分析与计算,求得总的理论总热阻,计算得出理论结温;同时应用有限元方法对该系统进行仿真分析,对LED模块（0.025 m0.025 m0.005 m）输入30 W 电功率,得出其仿真结温稳定在58.19℃,满足结温小于65℃的要求,说明应用热管的散热系统满足设计要求。由热阻网络模型计算得出的理论结温为57.43℃,与仿真结果相差0.76℃,其误差仅为1.31％,验证了理论分析计算的正确性,对实际工程中热设计具有指导意义。     

双(环戊二烯基)二氯化锆催化合成乙烯-笼型倍半硅氧烷杂化共聚物及其结构表征

通过双(环戊二烯基)二氯化锆(Cp₂ZrCl₂)催化剂和改良的甲基铝氧烷(MMAO)助催化剂, 合成了无机-有机杂化共聚物. 研究了2种具有不同单乙烯基反应基团的笼型倍半硅氧烷(POSS)与乙烯的聚合. 对共聚产物的结构、 热力学性质、 分子量及其分布等进行了研究. 共聚单体(POSS)的插入率在0.01%~0.30%之间, 随着共聚单体在共聚物中摩尔分数的增大, 聚合物的熔点和熔解热降低. 共聚物的热重分析结果显示, 乙烯-POSS共聚物拥有更高的热分解温度以及较高的热分解残留量. 随着POSS的加入, 聚合物的分子量明显提高, 聚合物的分子量分布变宽.     

Drinfeld Twist and Symmetric Bethe Vectors of Open XYZ Chain with Non-Diagonal Boundary Terms

With the help of the Drinfeld twist or factorizing F-matrix for the eight-vertex solid-on-solid(SOS) model,we find that in the F-basis provided by the twist the two sets of pseudo-particle creation operators simultaneously take completely symmetric and polarization free form.This allows us to obtain the explicit and completely symmetric expressions of the two sets of Bethe states of the model.     

带有增益的单微环谐振器的光速控制行为

带有损耗的光波导微环谐振器在实现光速控制时存在输出脉冲能量损耗大、脉冲形状畸变严重等问题。基于带有增益和带有损耗的微环谐振器的传输特性之间的对称性,计算分析了单微环谐振器的透射率、群折射率和群速度色散等特性,分析了增益和损耗对微环谐振器输出特性影响的机制。计算了带有增益的微环谐振器的光速控制行为,并与带有损耗的微环谐振器进行对比。结果显示,带有增益的微环谐振器输出脉冲不分裂且有较大的输出强度。脉冲延迟量和超前量比损耗系统大,可用于光速控制,克服了微环带有损耗时产生的光强损耗和脉冲畸变。     

High spin band structure in 139Nd

High-spin states in 139Nd nucleus have been reinvestigated with the reaction 128Te (16O, 5n) at a beam energy of 90 MeV. The level scheme has been expanded with spin up to 47/2 h. At the low spin states,the yrast collective structure built on the vh(-1)(11/2) multiplet shows a transitional shape with γ≈32° according to calculations of the triaxial rotor-plus-particle model. Three collective oblate bands with γ～-60° at the high spin states were identified for the first time. A band crossing is observed around hw ～0.4 MeV in one oblate band based on the 25/2- level.     

气流床气化炉壁面熔渣行为模拟

本文对气流床煤气化炉内高温合成气和壁面渣层的流动与传热传质过程进行了分析,建立了渣层流动、传热传质和相变数理模型,采用VOF方法对渣层和气体之间自由界面进行追踪,采用射线追踪方法(DTRM)计算辐射换热,采用焓法计算渣层相变,熔融态渣滴在渣层表面的沉积通过源项引入.应用所建立的数学模型对实验室规模的Texaco煤气化炉进行了模拟.结果表明:气化炉壁面换热系数从上到下先增加再减少最后再增加;炉膛温度升高,固态渣层厚度减少;壁面温度升高,固态渣层厚度减少.     

简体长度对旋风分离器内流场影响的数值模拟

采用RSM(雷诺应力模型)对旋风分离器内气相流场进行了数值模拟,计算得到不同筒体长度旋风分离器内流场的流动特性,结果表明分离器内的切向速度随着筒体长度的减小而增大;气体旋转运动的强度越强,分离效率越高.但筒体长度过短时,湍动能在内外涡分界面处有较大波动,使分离效率降低;当进口气速一定时,旋风分离器的压降随着筒体长度的增加而降低.     

细小圆管内液体流动特性实验研究

本文实验研究了去离子水在直径为 1.0～2.0 mm 的细小圆管中的流动阻力特性.通过比较相同直径、不同管长的压差,获得了摩擦因子及局部损失系数随 Re 数变化关系.本文实验条件下,对于不同直径的细小圆管,沿程压降及局部压降随流速变化趋势一致;随着管径减小,摩擦因子也减小,且在层流区和湍流区内均要比常规尺度条件下的小;对于不同直径的细小圆管,局部损失系数随 Re 数变化趋势基本一致,当 Re 数相同时,管径越小,对应的局部损失系数越大;对于直径为 1.0～2.0 mm 的细小圆管,临界雷诺数 Rec=2050～2300.     

Activation of Hydrogen-Passivated Mg in GaN-Based Light Emitting Diode Annealing with Minority-Carrier Injection

We discuss an issue on the activation of p-GaN material under different annealing conditions and study the mechanism for the p-GaN activation. Under annealing in nitrogen, it is found that hydrogen cannot be completely removed from p-GaN. The experiments also indicate that rudimental hydrogen can exist stably in a certain state where hydrogen does not passivate the Mg acceptor in the sample annealing under bias. However, making additional annealing in nitrogen, we find that the steady state hydrogen can be decomposed and the Mg-H complex could generate again. Hydrogen remaining in the layer seems to play a major role in this reversible phenomenon.     

Effect of Quantum Point Contact Measurement on Electron Spin State in Quantum Dots

We study the time evolution of two electron spin states in a double quantum-dot system, which includes a nearby quantum point contact （QPC） as a measurement device. We find that the QPC measurement induced decoherence is in the microsecond timescale. We also find that the enhanced QPC measurement will trap the system in its initial spin states, which is consistent with the quantum Zeno effect.